PVQ10

Vickers PVQ10 — axial piston pump 10 cm³

Vickers PVQ10 is a variable displacement axial piston hydraulic pump of the Quiet Series, manufactured by Eaton. The PVQ series was developed for industrial applications with demanding noise level requirements — the sound pressure level approaches or is lower than that of the drive motor. Noise reduction is achieved through a patented distribution port arrangement that also reduces outlet pressure ripple. The smallest frame size in the series. Used in machine tool equipment, small presses, conveyor lines and hydraulic power units in industrial facilities. Open circuit.

Full model range in the section Vickers PVQ series

Technical specifications PVQ10

• Displacement: 10.5 cm³/rev
• Max. speed: 1800 rpm
• Max. pressure: 210 bar
• Recommended pressure (noise): ≤175 bar at full flow
• Weight: 7.2 kg
• Flange: SAE A (2-bolt)

PVQ10 model code structure

Example: PVQ10 - A2R - SE1S - 20 - C21 - 12

• PVQ10 — series type and frame size (10 = 10.5 cm³/rev)
• Flange: A2 — SAE J744 82-2 (SAE A, 2-bolt), standard; MA — ISO 3019/2-80A2HW (shaft N only)
• Rotation: R — right-hand (CW), standard; L — left-hand (CCW)
• Ports: SE — SAE O-ring rear ports (standard); SS — SAE O-ring side ports
• Shaft type: 1 — straight keyed SAE A mod.; 3 — spline SAE A 9T 16/32 DP; N — ISO 3019/2 E20N (MA flange only)
• Seal: S — Buna N (standard); F — Fluorocarbon (Viton)
• Design number: 20, 30
• Compensator: C21 — pressure 24–210 bar (standard); CM7 — 70 bar mobile, 24–103 bar; CG — load sensing; C21D — C21 with dampening; CD21 — electric dual range; UV — unloading valve; suffix V — additional load sensing
• Control design: 11, 12 (standard); 30 (CG/SS variants)

Installed in equipment

• Equipment types

  • Industrial equipment
  • Industrial conveyor
  • Injection molding machine

OEM numbers PVQ10

• Vickers Eaton

  • 02-341576 — PVQ10-A2R-SE1S-20-C21-12
  • 02-341618 — PVQ10-A2L-SE1S-20-CM7-12
  • PVQ10-A2L-SE1S-20-C21-12
  • PVQ10-A2R-SE1S-20-CG-30
  • PVQ10-A2R-SE1S-20-C21D-12
  • PVQ10-A2R-SS1S-20-CG-30

Spare parts for Vickers PVQ10

• Cylinder block Rotor
• Drive Shaft
• Separation Bush
• Ball guide
• Disk Spring
• Snap Ring
• Slider
• Coupling of drive shaft
• Cylinder block press pin
• Charge Pump
• Roller Bearing
• Cradle Bearing Set
• Retainer Plate
• Swash plate (cam rocker)
• Piston shoe
• Rotor Spring
• Seal kit pump
• Shaft Seal
• Wire
• Valve plate
• Ball guide washer
• Pressure Override Valve
• Control Valve Regulator
• Regulator assembly
• Servo Piston

Repair and service PVQ10

Diagnostics and repair of pump Vickers PVQ10: monitoring operating pressure and leaks, inspection of the piston group and valve plate, and bench testing after repair.

Contact us — we will repair pump PVQ10 and select genuine spare parts.