
Sauer-Danfoss 90M130 — hydraulic motor 130 cm³
The Sauer-Danfoss 90M130 (90MF130) hydraulic motor is a closed-circuit axial piston motor of the Series 90 with fixed displacement and a swash plate. Fixed displacement means a constant ratio between pump flow and shaft output speed — without regulation, but with maximum simplicity of design and reliability under prolonged load. It is used in the hydrostatic traction drive of combine harvesters by Claas Lexion series, Case IH, New Holland CR and John Deere STS/WTS, in the travel drive of heavy soil compactors by Bomag and Dynapac, and in the transmission of Timberjack and Ponsse forwarders.
Full model range in the section Sauer-Danfoss Series 90 Motor.
Technical specifications 90M130
- Displacement: 130 cm³
- Maximum working pressure: 420 bar
- Peak pressure: 480 bar
- Nominal speed: 2600 rpm
- Maximum speed: 2850 rpm
- Minimum speed: 500 rpm
- 90M130 — fixed displacement motor
Installed in equipment
-
Claas
- Lexion 450 — Harvester
- Lexion 560 — Harvester
- Lexion 570 — Harvester
- Lexion 570R — Harvester
- Lexion 580 — Harvester
-
Case IH
- 1000 — Harvester
- 7010 — Harvester
- 8010 — Harvester
- 9010 — Harvester
- AFX8010 — Harvester
-
New Holland
- CR9060 — Harvester
- CR9070 — Harvester
-
John Deere
- 9660 WTS — Harvester
- 9760 STS — Harvester
-
Bomag
- BW213 DH — Roller / Compactor
-
Dynapac
- CA362 — Roller / Compactor
-
Timberjack
- 1410 — Forwarder
-
Ponsse
- Buffalo — Forwarder
OEM numbers 90M130
-
Sauer-Danfoss
- 11000847 — 90MF130 / 90-M-130
-
Claas
- 7718980
- 6687410
-
Caterpillar
- 771-8980
- 668-7410
-
Case IH
- 87282670
- 86997120
Spare parts for Sauer-Danfoss 90M130
- Cylinder block Rotor
- Ball guide
- Disk Spring
- Snap Ring
- Coupling of drive shaft
- Cylinder block press pin
- Roller Bearing
- Cradle Bearing Set
- Retainer Plate
- Swash plate (cam rocker)
- Piston
- Rotor Spring
- Shaft Seal
- Valve plate
- Ball guide washer
- Washer
- Pressure Override Valve
- Seal kit motor
- Control Valve Regulator
- Servo Piston
- Friction Plate
- Drive Shaft motor
Repair and service 90M130
Diagnostics and repair of hydraulic motor Sauer-Danfoss 90M130: monitoring operating pressure and leaks, inspection of the piston group and valve plate, and bench testing after repair.
Contact us — we will repair 90M130 and provide spare parts with quality warranty.
Technical specifications verified by the Aspect Plus technical catalog.